Dashboard

Dashboard

Note: Your are not logged in. We can not keep your scores or track your progress unless you Register and Log In

Driver's Handbook on Cargo Securement - Chapter 8: Intermodal Containers

What Does This Section Cover?

The requirements in this section apply to the transportation of all intermodal containers.

Note: When securing cargo contained within an intermodal container, follow general cargo securement requirements (Section 2) or, if applicable, follow the commodity specific requirements.

Special Circumstances: Securing Loaded Intermodal Containers on Container Chassis Vehicles

Requirements for securing the container

Secure each intermodal container to the container chassis with securement or integral locking devices that cannot accidentally become unfastened. Integral locking devices do not have to be adjustable.

Note: If necessary, use secondary attachments to ensure that latches remain fastened in transit.

Securing devices must restrain the container from moving more than:

  • 1.27 cm (1/2 in) forward.
  • 1.27 cm (1/2 in) rearward.
  • 1.27 cm (1/2 in) to the right.
  • 1.27 cm (1/2 in) to the left.
  • 2.54 cm (1 in) vertically.

Secure the front and rear of the container independently.

  • 2 latches on the chassis engage anchor points towards or at the front of the container.
  • 2 latches on the chassis engage anchor points towards or at the rear of the container.

If a latch is missing or broken, secure the corner by an alternative means, such as chain or wire rope.

Special Circumstances: Securing Loaded Intermodal Containers on Non-Chassis Vehicles

Requirements for positioning the container
Position the intermodal container so that:

Either all lower corners rest upon the vehicle.

Or the corners are supported by a structure capable of bearing the weight of the container. Independently secure the support structure to the vehicle.

Requirements for securing the container

Secure each container to the vehicle by:

  • Either chains, wire ropes, or integral devices that are fixed to all lower corners.
  • Or crossed chains that are fixed to all upper corners.
  • Or both.

Secure the front and rear of the loaded container independently.

Secure the four corners using tie-downs that are attached to the loaded container.

The tie-downs must have an aggregate working load limit of at least 50% of the loaded weight of the loaded container.

Attach each chain, wire rope, or integral locking device to the container in a manner that prevents it from becoming unfastened while in transit.

Special Circumstances: Securing Empty Intermodal Containers on Non-Chassis Vehicles

Empty intermodal containers transported on non-chassis vehicles do not have to have all lower corners resting upon the vehicle or supported by a structure if they meet each of the following four requirements:

  • Requirement 1:

    The container is balanced and positioned on the vehicle so it is stable before adding tie-downs or other securing devices.

  • Requirement 2:

    The container does not hang over the front or rear of the trailer by more than 1.5 m (5 ft).

  • Requirement 3:

    The container does not interfere with the vehicles maneuverability.

  • Requirement 4:

    The container is secured to prevent side-to-side, forward, rearward, and upward movement by:

    • Either by following the requirements for loaded containers.
    • Or by following the general cargo securement requirements for tie-downs.

Multiple-Choice Questions:

Question #758 (1 of 3)

Give a brief explanation of the problem:

Optional: Leave your email address if you would like a reply:

Report Cancel

How many anchor points should be used to secure an intermodal container on a chassis vehicle?

  • 2 latches in the front and 2 in the middle.
  • 2 latches in the middle, and 2 at the rear.
  • 4 latches total, anywhere on the trailer.
  • 2 latches each at or near both the front and rear.

Secure the front and rear of the container independently.

  • 2 latches on the chassis engage anchor points towards or at the front of the container.
  • 2 latches on the chassis engage anchor points towards or at the rear of the container.
Next
Question #759 (2 of 3)

Give a brief explanation of the problem:

Optional: Leave your email address if you would like a reply:

Report Cancel

What is the minimum WLL required of tiedowns securing loaded intermodal containers on non-chassis vehicles?

  • It depends on the length of the container.
  • 80% of the loaded weight of the container.
  • 20% of the loaded weight of the container.
  • 50% of the loaded weight of the container.

Secure each container to the vehicle by:

  • Either chains, wire ropes, or integral devices that are fixed to all lower corners.
  • Or crossed chains that are fixed to all upper corners.
  • Or both.

Secure the front and rear of the loaded container independently.

Secure the four corners using tiedowns that are attached to the loaded container.

The tiedowns must have an aggregate working load limit of at least 50% of the loaded weight of the loaded container.

Attach each chain, wire rope, or integral locking device to the container in a manner that prevents it from becoming unfastened while in transit.

Previous Next
Question #757 (3 of 3)

Give a brief explanation of the problem:

Optional: Leave your email address if you would like a reply:

Report Cancel

When securing an intermodal container on a chassis, what is the maximum allowable vertical travel when secured?

  • 1 inch
  • 2 inches
  • 1/2 inch
  • 2 1/2 inches

Securing devices must restrain the container from moving more than:

  • 1.27 cm (1/2 in) forward.
  • 1.27 cm (1/2 in) rearward.
  • 1.27 cm (1/2 in) to the right.
  • 1.27 cm (1/2 in) to the left.
  • 2.54 cm (1 in) vertically.
Previous Next

Why Join Trucking Truth?

We have an awesome set of tools that will help you understand the trucking industry and prepare for a great start to your trucking career. Not only that, but everything we offer here at TruckingTruth is 100% free - no strings attached! Sign up now and get instant access to our member's section:
High Road Training Program Logo
  • The High Road Training Program
  • The High Road Article Series
  • The Friendliest Trucker's Forum Ever!
  • Email Updates When New Articles Are Posted

Apply For Paid CDL Training Through TruckingTruth

Did you know you can fill out one quick form here on TruckingTruth and apply to several companies at once for paid CDL training? Seriously! The application only takes one minute. You will speak with recruiters today. There is no obligation whatsoever. Learn more and apply here:

Apply For Paid CDL Training