Small victories in school is what it is all about. You won’t “master” everything while there, and the companies know this. I try to recall the one new thing I have learned each day and build on it the next. It’s your journey.
Kid, the instructors can only show a student so many times. The student must figure it out. If there are multiple instructors, then it's possible to get another perspective.
I have been running hard trying to make some money before getting my next student. I am currently sitting in line to check into a Home Depot DC with only 1 hour and 59 minutes left on my clock. Thankfully we have a terminal nextdoor.
A facility where trucking companies operate out of, or their "home base" if you will. A lot of major companies have multiple terminals around the country which usually consist of the main office building, a drop lot for trailers, and sometimes a repair shop and wash facilities.
Thanks Scott as usual, having a tough time with my 90" degree alley docks 😵
It takes me a little more time to learn thing then others.
It was a great day today!
Just take your time on the 90. Drive your tandems.
A set of axles spaced close together, legally defined as more than 40 and less than 96 inches apart by the USDOT. Drivers tend to refer to the tandem axles on their trailer as just "tandems". You might hear a driver say, "I'm 400 pounds overweight on my tandems", referring to his trailer tandems, not his tractor tandems. Tractor tandems are generally just referred to as "drives" which is short for "drive axles".
A set of axles spaced close together, legally defined as more than 40 and less than 96 inches apart by the USDOT. Drivers tend to refer to the tandem axles on their trailer as just "tandems". You might hear a driver say, "I'm 400 pounds overweight on my tandems", referring to his trailer tandems, not his tractor tandems. Tractor tandems are generally just referred to as "drives" which is short for "drive axles".
It was a great day today!
Glad to hear THAT, Kiddo !!!
Care to share ?!?! KUDOS, anyhow~!
~ Anne ~
ps: Scott's right, ... too! (My other half brought the T/T home last night w/Tandems stuck BACK....be happy your's aren't!)
A set of axles spaced close together, legally defined as more than 40 and less than 96 inches apart by the USDOT. Drivers tend to refer to the tandem axles on their trailer as just "tandems". You might hear a driver say, "I'm 400 pounds overweight on my tandems", referring to his trailer tandems, not his tractor tandems. Tractor tandems are generally just referred to as "drives" which is short for "drive axles".
A set of axles spaced close together, legally defined as more than 40 and less than 96 inches apart by the USDOT. Drivers tend to refer to the tandem axles on their trailer as just "tandems". You might hear a driver say, "I'm 400 pounds overweight on my tandems", referring to his trailer tandems, not his tractor tandems. Tractor tandems are generally just referred to as "drives" which is short for "drive axles".
I'm so ready for my CDL exam and I'm ready for you to be my finisher Scott 😂
A CDL is required to drive any of the following vehicles:
New! Check out our help videos for a better understanding of our forum features
Nice!
Congrats, Kiddo...
~ Anne ~