I've Applied To Attend Driver Training At Swift Academy Phoenix

Anne, that Paul Simon song has been living rent-free in my brain since childhood, along w another favorite from the man, Kodachrome. "I got a Niiiiiiikon camera, I love to take the phooooooootograph..." Planner don't taaaaake my dry van load awaaaaaaaaay....

Monday 19 September 2022 Day six of 20 at Swift Driver Academy in Phoenix, Arizona.

The academy here in Phoenix is four weeks long, and today was day one of our second week. This morning we took a complete tour of the Swift compound. It included a stop at an on-campus medical office, where we all had a urine drug test. There was no advance warning, and it seemed odd to me the company would pay for another one of these after doing one a couple of weeks ago at my DOT physical. They must have their reasons. Maybe some students think since they cleared the initial drug test, another could not soon follow. Surprise!

Part of our tour was spent at the Driver Center or driver lounge. Inside is a semi truck set up as a coffee stand. I asked one of the drivers seated there if he likes to spend time at Swift terminals across the country. He was pretty blunt with his "not really." He likes the Phoenix terminal , and that's about it. Other drivers chimed in with high marks for Lancaster (near Dallas, Texas) and West Valley City (Near Salt Lake City, Utah). The ones they were especially critical of I will see for myself soon enough. No need to spread negativity about things I've not yet experienced. Suffice it to say for now, in the Swift universe, it may be hard to beat Phoenix for driver amenities.

As we made our way through the Driver Center, we encountered a couple of other drivers who recognized our trainer. He asked them how things were going, and the responses were not good. “There have been several times I’ve just about left the truck on the side of the road,” one said. Hmm… Not what I would say in front of a group of people I know are academy students. Another obviously had similar concerns but would not voice them in front of students. He told the trainer he’d just switched assignments at Swift, and will reach out to the trainer in a week or two to let him know how things are going. While I was surprised by the answers from those two drivers, I’m also kinda proud of them. Some days are diamonds, some days are coal. But they are still here, gutting it out for the diamond days. That will be me very soon. I’m glad they are hanging on. So many others just quit.

We spent much of the day learning about daily logs and how to fill them out, just in case our digital logs ever betray us. We were shown several examples of logs drivers tried to fudge. Not really smart considering all the ways the company has to track your movements. The takeaway here, is don’t try to cheat the systems that are in place. They are more consistently reliable that your subterfuge.

Toward the end of the day, we talked a little about the mentor matching process. That’s for the trainer truck we will be on for four to six weeks after graduation. We were told we get to specify whether we prefer a male or female trainer and whether that person is a smoker or a non-smoker. I don’t really have preferences based on gender or tobacco usage. I want a mentor who is the right blend of patient and pushy. Patient enough not to jump all over me for minor mistakes, but pushy enough to show me what running as hard as I can legally and safely looks like so I actually know it is possible. At least that’s what I THINK I want. We’ll see how much that changes if I actually get one!

For what my 3pence is worth; I think your outlook in the last paragraph above, speaks volumes. When Tom was in your shoes, his needs / requests were simple...just like yours. Basic, yet thorough. Not too chatty. Pushy, but not 'showy...' tolerable. He'd called it 'aggressively assertive.' Sure did pay off, too! Your approach to ALL above, sounds awesome.

Sounds like a plan, Stan! Ya won't have to Hop on the bus, Gus ! Ya don't even need to .. Discuss Much, NOR drop off the Key, ya see?!? (If anyone gets that ... I'm showing my hand, my age, my .... wits! (Yeah, that's it!) HAHA!)

Whether or not you've read these; or if you'll have time at this stage, maybe sneak in a minute. Excellent blogs on JUST THAT subject here for ya:

Trucking Blogs: Types of Trainers, and How To Deal with Them ! Epic Training Blogs, etc!

Best from us, good sir;

~ Anne & Tom ~

ps: All the accolades, kudos, and encouragement you're receiving... is solid.

Hi George, thanks for following along. I'm glad you like my training diary. I'm excited to someday soon have my own truck, even though I will indeed be scared at first and praying my favorite trainer was in my passenger seat. Your "hammer down" comment reminds me of what my current trainer says when I need to turn the steering wheel all the way to the left or all the way to the right during a backing maneuver: "NO MERCY!!!" She means I gotta turn the wheel ALL THE WAY in whichever direction it needs to go. Sometimes after I get rolling, there is even more play in the "all the way" that I need to steer toward. My RAV4 never does that, so it takes some getting used to!

Great diary. It once again proves Swift runs an excellent training program. You definitely heeded the advice as to not join the negative naysayers. Best of luck before you know it you will be in your own truck scared $)&less at first praying your trainer/instructor was still there w you. Hammer down!

Hi Grinch, keep me posted on your Phoenix plans. We are in class Monday through Friday from 8 am to 5 pm with an hour-long break for lunch at noon. I can meet up on the lunch break, or before or after class as I live locally (Mesa, Arizona). There is one student in my class who intends to do flatbed. It would be great if he could meet you! I agree that building and maintaining relationships can make or break a driver's success. I intend to make my driver manager and planners happy to hear from me, not annoyed to hear from me. I hope to see you soon!

Micheal great thread. You have gotten some great advice from everyone in here so far. I may bump in to you early next week as I’ll probably be dropping into Pheonix for a load, groceries and a shower. I’m a swift flatbed mentor. Keep your spirits up focus on each step of the processes and don’t overthink things too much, before you know it we wil be running down the road together. Swift is a great company overall with a lot of great people working hard for the drivers in the background supporting us. One of the keys is building relationships with those you work with. For example I communicate well with my planners and driver leaders they know how I like to run, and I know what they expect. As you develop the relationships it makes it easier for you. If I can help or answer a question feel free to reach out.

Tuesday 27 September 2022 Day two on the training pad at Swift Academy in Phoenix went pretty well. We each got to move trucks to set them up for maneuvers, which means we got to drive a loop around the track each time to get the truck to the correct lane. I loved that. My first solo runs! Yes, I was limited to five miles per hour, but that’s probably for the best at the moment. I was alone in the truck, chugging along on the loop, making wide right turns, and stopping well before (not at, not beyond) the mid-loop stop sign. I was able to learn the delay of the accelerator, and the abruptness of the service brakes. Actually rolling allowed me to learn to better control speed and stopping. I could not wipe the smile from my face during those loops! I drove a big dang truck and trailer! And it was fun!

I experienced some serious left-right confusion during the first of today’s three offset backing maneuvers. Yesterday, I was taught to do a left-side offset maneuver. That is how the handout from the school describes the procedure, complete with side-specific turning instructions and illustrative photos. So when April told me this morning to do the offset right instead of left, she added, “Just do the opposite” of what our handout says. Sounded simple enough. Tee hee hee! Too many words to tell the story here (what’s my limit? 5,500?). Suffice it to say I had more than a dozen instances of telling myself, “No! Your OTHER left!” It was ugly, but true to her word, April taught me how to "fix it!" The Health Summary on my iPhone thinks I climbed four flights of stairs today. Nope. There are no stairs at the academy. I just “Got Out And Looked.” A lot.

Our hot Phoenix weather continues to be a real challenge. It was 105 degrees in the shade yesterday, and 103 in the shade today. In the open sun, on the asphalt of the pad, it’s a whole lot hotter than that. Ever stand on ground so hot it burns your feet through your shoes? That happens when you are out there for hours at a time like we are. We take precautions, like wearing long sleeve shirts, pants, closed-toe shoes and big floppy hats. The academy vigilantly reminds us to stay hydrated. It also supplies sunscreen, a cooler full of ice, bottled water and electrolyte drinks that we keep with us at all times. We even have shade structures and picnic tables. But there’s really no way to do the learning without being in the sun. Keep that in mind if you intend to train in Phoenix any time from May to October. One hundred degrees is as cool as the days are gonna get. One hundred ten is more likely in June, July and August. Lucky for us, the temperatures are expected to be about 10 degrees cooler by the time we test two weeks from now. Woo hoo, only 92!

At the end of each day on the pad, we get to “break down” the trucks. That means we disconnect the trailer from the tractor. Lowering the landing gear all the way down from the all-the-way up position doesn’t happen fast. I just about smacked myself in the jaw a few times while turning the crank because I was tired and wanted to get it over with. Eventually, I slowed down. In the morning, I’ll get to raise the landing gear up again after we reconnect the trailer. I’ll likely crank the handle more slowly. Not a good look if you knock yourself out first thing in the morning!

Micheal, We just loaded here outside of chicago. Heading to Nogales south of you. Will then most likely be inpheonix Sunday afternoon to get a load on Monday. Can’t miss my kenworth it is the only flatbed in the fleet that is always flying a 3x5 American flag of the back. If I’m there Monday and not rushing out. I’ll try and sneak over to the range and meet up with you for a few at least

Hi Grinch, keep me posted on your Phoenix plans. We are in class Monday through Friday from 8 am to 5 pm with an hour-long break for lunch at noon. I can meet up on the lunch break, or before or after class as I live locally (Mesa, Arizona). There is one student in my class who intends to do flatbed. It would be great if he could meet you! I agree that building and maintaining relationships can make or break a driver's success. I intend to make my driver manager and planners happy to hear from me, not annoyed to hear from me. I hope to see you soon!

Micheal great thread. You have gotten some great advice from everyone in here so far. I may bump in to you early next week as I’ll probably be dropping into Pheonix for a load, groceries and a shower. I’m a swift flatbed mentor. Keep your spirits up focus on each step of the processes and don’t overthink things too much, before you know it we wil be running down the road together. Swift is a great company overall with a lot of great people working hard for the drivers in the background supporting us. One of the keys is building relationships with those you work with. For example I communicate well with my planners and driver leaders they know how I like to run, and I know what they expect. As you develop the relationships it makes it easier for you. If I can help or answer a question feel free to reach out.

Wednesday 28 September 2022 Day three on the pad and we started by coupling four trucks to trailers. It’s almost unbelievable what we do in the morning, fire up the tractors, connect trailers, raise the landing gear and be ready to roll. None of us had any idea how to do those things two days ago. Now it is our responsibility to do them and to do them correctly so we can drive the rigs. Pretrip inspection is how every day will start from now on. Today I was paired with Erika, the lovely classmate who brought me lunch for several days last week. Because I did the pretrip yesterday, Erika did it today and I followed along. She did the narrative, basically saying out loud everything she would check and pointing to it if visible, or in the general direction if not. When I did my inspection yesterday I could not seem to find the torque rod on the tandem suspension. Is it really there? I bet it is. I just don’t know where it is. I will ask tomorrow.

After pre-trip inspections, instructor Rob took us to a different part of the range to “practice 45s.” Not an audio recording on a small vinyl disc, but a backing maneuver. Rob got us all “into the box” a couple of times, then we got additional help from Mr. E, the lead instructor of the academy, so we could get a few more 45s in before lunch. Mr. E is really good at helping students feel capable of doing the maneuvers. He’s entertaining and playful, so he puts you at ease. But he’s also the one who takes many students out for their final CDL exam, so the level of respect and seriousness is always there. Mr. E emphasized the use of the convex mirrors on the fenders/hood of the truck when backing, and it’s starting to click for me a little more after working with him. Once you know what you are looking for, you can really see a lot!

I’m a little stressed out about memorizing the pre-trip inspection , but I am doing what I can to study it. Week one instructor said the way to study it is to read it out loud so you are used to hearing your own voice when you do the inspection. Week two instructor said the way to study it is to record yourself reading it and to make that the only “music” we listen to until our CDL exam day. This morning I got up a couple of hours early so I could do both. The recording sounds odd to me because I’m not used to hearing my own voice. But I’m gonna keep using it as directed, even reading along like I did this morning, or speaking along on my drive home like I did this evening. I will get this script firmly planted in my head.

Rewind a bit. After lunch, we got our first taste of the open road! Erika and I were assigned an instructor we’ve seen around but not worked with much before. His name is Bryan. His even-keeled and playful personality made for a really enjoyable first ride outside the wire. His focus for us was keeping the truck and trailer in our lane, keeping our speed at least five miles below the posted speed limit, slowing down in time to make a gentle stop, and how to make a right turn without running over a curb.

It was amazing.

Two highlights from my time behind the wheel: First, on about my third right turn in traffic, I watched the tandems (trailer axles) clear the apex of the turn and immediately “closed the door,” or put the tractor in the right lane so no cars could sneak in behind me on my right. I watched the trailer track into the right lane and I was like, “Wow! I just did that!” Second, during a right turn off of Buckeye Road onto southbound West 75th Avenue, I had to put the tractor kinda close to drivers in a busy left lane headed north on West 75th. As I was turning, I came face-to-face with a CRST driver whose eyes were as wide as saucers. He was frantically pantomiming a hard-right,hand-over-hand turn maneuver because all he saw was a Swift STUDENT DRIVER truck coming right at his driver-side window! I safely completed the turn as guided by Bryan. It was identical to all the others I’d done earlier. This one just had a touch of comedy!

While Erika took her turn, I sat in the back of the truck and had time to reflect on the day's experience behind the wheel, I was so happy. I can’t even describe it. I felt elated. I felt relieved. I felt hopeful. I felt content in a way I’ve never felt. I will remember this day for the rest of my life. I think today is the day I fell in love with the notion of being a truck driver.

Micheal great thread. You have gotten some great advice from everyone in here so far. I may bump in to you early next week as I’ll probably be dropping into Pheonix for a load, groceries and a shower. I’m a swift flatbed mentor. Keep your spirits up focus on each step of the processes and don’t overthink things too much, before you know it we wil be running down the road together. Swift is a great company overall with a lot of great people working hard for the drivers in the background supporting us. One of the keys is building relationships with those you work with. For example I communicate well with my planners and driver leaders they know how I like to run, and I know what they expect. As you develop the relationships it makes it easier for you. If I can help or answer a question feel free to reach out.

Wow, it's awesome to see YOU back around; it's sure BEEN awhile!!

Thanks for stopping in; that's awesome of you, man.

~ Anne ~

While Erika took her turn, I sat in the back of the truck and had time to reflect on the day's experience behind the wheel, I was so happy. I can’t even describe it. I felt elated. I felt relieved. I felt hopeful. I felt content in a way I’ve never felt. I will remember this day for the rest of my life. I think today is the day I fell in love with the notion of being a truck driver.

Excellent update, Michael; and not JUST this last paragraph; this one just POPPED. Nice wrap of an excellent entry; hold that thought/feeling!

REALLY hope you take Grinch up on a meet & greet. It will have such an amazing effect on you; can't have too many pals, allies, and compadres in this industry. Especially, fellow TT'ers. (I'm getting ready to call two of'em momentarily, myself!)

Keep on, good sir.

~ Anne ~

Anna, I have been here just lurking and falling asleep with the tablet some nights. Life of flatbed ya know. Honestly just been running a lot and training keeps me busy, most eves are discussing the day with the student cooking dinner and helping them study what they need to know. So usually I fall asleep 10 min after I start a show or troll the internet.

Wow, it's awesome to see YOU back around; it's sure BEEN awhile!!

Thanks for stopping in; that's awesome of you, man.

~ Anne ~

Micheal great thread. You have gotten some great advice from everyone in here so far. I may bump in to you early next week as I’ll probably be dropping into Pheonix for a load, groceries and a shower. I’m a swift flatbed mentor. Keep your spirits up focus on each step of the processes and don’t overthink things too much, before you know it we wil be running down the road together. Swift is a great company overall with a lot of great people working hard for the drivers in the background supporting us. One of the keys is building relationships with those you work with. For example I communicate well with my planners and driver leaders they know how I like to run, and I know what they expect. As you develop the relationships it makes it easier for you. If I can help or answer a question feel free to reach out.

Wow, it's awesome to see YOU back around; it's sure BEEN awhile!!

Thanks for stopping in; that's awesome of you, man.

~ Anne ~

Micheal, I will be there in Pheonix all day Monday doing a reset. Let’s get together with you and your buddy. I put my number in my bio. Shoot me a text when you see this so we can connect up.